亚洲天堂2020五月天_在线观看av 免费看片_A级特级毛片在线播放_国产综合色产在线观看

The flat pocket bag making machine can be said to be fully automated, as long as 1-2 people can operate the device. The flat pocket bag making machine can adjust the speed of production and the size of the product, and it is not only fixed length and photoelectric tracking, but also ensures accurate and stable operation. Therefore, the use of the flat pocket manufacturing machine reduces labor intensity to a certain extent and improves the efficiency of work. In the process of bag making, the flat pocket manufacturing machine causes some problems in the finished product due to operation, maintenance, etc., such as pitting, small holes, and the like.

First, there are pitting on the bag

1. The rubber roller and aluminum roller are not wiped clean;

2. The underside of the water pressure plate is not wiped clean;

3, transport with dirty things;

4, the knife edge has a focus.

Solution:

1. Wipe all parts with a cloth wiper;

2. Clean the underside of the water pressure plate with a printing solvent;

3. After cleaning with a polishing machine, clean it;

4. Wipe the blade with a damp cloth to check if the temperature is normal. If it is not normal, adjust to the appropriate temperature.

Second, there are small holes in the bag

1. There is a scrap in the knife edge;

2. The water pressure plate is not pressed well;

3, the speed is too fast;

4, the zipper, the ribs are thicker;

5. The discharge roller is crushed.

Solution:

1. Wipe the knife edge and lower the temperature by 5-10 degrees Celsius;

2. Repress the water pressure plate;

3. Adjust the speed;

4, the zipper, the ribs become thinner;

5. Replace the discharge roller.